Mobile / WhatsApp
E-mail
![$cat['title']}](https://www.lotfixsealant.com/uploadfile/202604/cb364edc48c45a.jpg)
| Base Technology | Oxime (Neutral) |
|---|---|
| Skin Time | 15~20 mins |
| Tack Free Time | 30~40 mins |
| Curing Time | ≤24 hours @ 5 mm |
| Sagging Properties | Non-sag |
| Application | Special designed for roof and gutter sealing |
| UV Resistance | Excellent |
| Shelf Life | 12 months |
LOTFIX C16 is a one-component neutral cure silicone sealant developed for roof and gutter sealing where waterproof performance, weather resistance, and non-corrosive adhesion on exposed metal surfaces are important.
LOTFIX C16 Roof & Gutter Silicone Sealant is a one-component neutral cure silicone sealant specially designed for sealing roofs, gutters, and related outdoor joints. It is waterproof and weather resistant, with excellent adhesion to common construction materials used in roof and drainage systems.
A key advantage of this product is that it does not cause corrosion on bare metals, making it especially suitable for exposed metal roof systems, flashings, down pipes, and sheet metal connections where long-term outdoor sealing is required.
- Neutral cure and low odour for practical installation work.
- Waterproof and weather resistant for long-term outdoor exposure.
- Non-corrosive on bare metals, which is important for roof and gutter systems.
- No seasonal limitation for use as stated on the current product page.
- Resistant to ozone, UV, and temperature extremes for exterior sealing work.
For roof seams, overlaps, and common roof leakage repair points.
Suitable for flashings, drainage edges, and pipe-related sealing details.
For sealing gutters and related water drainage joints exposed to rain and weather.
Suitable for sealing in sheet metal fabrication and similar metal assembly work.
The above data is based on a standard environment with a construction temperature of 23 plus or minus 2 degrees C and a humidity of 50 plus or minus 5 percent.
Contact us for other sizes and special colors.
- Not for fireproofing seal systems.
- Not suitable for structural applications.
- Not suitable for aquarium construction or areas of permanent immersion.
- Do not use when substrate temperature is above 50 degrees C or on surfaces that are wet, oily, greasy, dusty, or dirty.
- Not intended for food-contact applications.
